|
|
|
|
|
|
|
|
|
|
|
|
These High-density Light Units are ideal for applications where irradiance must be focused at the center of the workpiece.
|
|
With these Light Units, the edges of the workpiece and any engraving or damage on the surfaces can be detected clearly through low-angle illumination.
|
|
|
|
|
|
|
|
|
|
These Bar Light Units feature high-density LEDs mounted on a flat circuit board. They can be used for a wide range of applications because the illumination angle can be set freely.
|
|
These Ring Light Units achieve uniform illumination through diffused light. They are ideal for applications where the entire workpiece must be illuminated uniformly.
|
|
|
|
|
|
|
|
|
|
These Light Units allow the edges of the workpiece and engraving or damage on surfaces to be detected through low-angle diffused light.
|
|
These Light Units radiate diffused light from the sides of a square case. They are ideal for detecting the edges of square workpieces and engraving or damage on the surfaces.
|
|
|
|
|
|
|
|
|
|
These Backlights are designed to illuminate workpieces from the back. They are ideal for external appearance photography or penetration photography.
|
|
Uniform diffused-light irradiation is achieved with these Dome Light Units through CCS¡Çs unique illumination technology. Coaxial epi-illumination and dome lighting are achieved with one unit.
|
|
|
|
|
|
|
|
|
|
These Light Units uniformly radiate the entire surface of curved glossy workpieces without creating shadows.
|
|
Mirrored surfaces or highly reflective workpieces can be illuminated uniformly with these Coaxial Light Units. They are ideal for photographing scratches and dents, or characters.
|
|
|
|
|
|
|
|
|
|
These Coaxial Light Units radiate collimated light that is ideally suited for photographing minute scratches and dents or characters on reflective surfaces, such as CDs or wafers.
|
|
Line Light Units are ideally suited for taking pictures with a line sensor camera. The irradiance, uniformity, and length can be selected according to the application.
|
|
|
|
|
|
|
|
|
|
These Line Light Units radiate light that is converged into a straight line by using cylindrical lenses.
|
|
Light weight, compactness, and low power consumption are features of these Spotlights, which are applicable to a wide range of applications.
|
|
|
|
|
|
|
|
|
|
These Spotlights enable uniform illumination focused in the required range. They are ideal for replacing halogen floodlights.
|
|
These LED Light Sources can replace halogen light sources. The low power consumption and long life reduces the load on the environment.
|
|
|
|
|
|
|
|
|
|
These LED Fiber Heads were developed through CCS¡Çs unique light convergence technology. The product lineup includes Straight and Ring-type Fiber Heads.
|
|
These Light Sources for Fiber Heads are lightweight, compact, and consume less power. Full-color Light Sources are also included in the lineup.
|
|
|
|
|
|
|
|
|
|
Uses an original LED with a peak emission wavelength of 365nm. Ideal for various types of photography using the difference in the scattering rate.
|
|
Select a peak emission wavelength from 850 and 940nm. These Light Units are deal for various types of photography in which light must penetrate the object.
|
|
|
|
|
|
|